Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

THP9045A1023 Wiring Module
WIRESAVER
THERMOSTAT
Rc K C
Rc Y G C
EQUIPMENT
APPLICATION
The THP9045 Wiring Module is designed to be used
with applicable thermostats in which a 24V common
is required and there are not enough wires. The K
terminal on the thermostat can be used to operate
both the fan and compressor on a single wire, and the
module is designed to receive the signal from the K
terminal, split that signal and re-route it to operate
the compressor, and/or fan for normal operation.
Use with the following thermostats:
THX9321R
THX9321R5000
THX9321R1008
TH8320UP1003
T5060F7088
W-O/B
THP9045A
W-O/B
M31301B
INSTALLATION INSTRUCTIONS
FEATURES
• Can be used when a common wire is required.
• Mounts easily on or near HVAC equipment.
INSTALLATION
1. The THP9045 Wiring Module can be equip-
ment- or wall-mounted in any orientation or as
dictated by the surroundings.
2. Precise leveling of the THP9045 module is not
required.
3. Identify the four wires in the wall and connect to
the R, C, W, and K terminals on the thermostat.
4. Wire the K terminal on the thermostat to the K
terminal on the THP9045 module.
5. Wire the R and C terminals on the thermostat to
the R (power) and C (common) terminals on the
THP9045 module and equipment.
6. Wire the W terminal from the thermostat to the
W (heat relay) terminal on the HVAC equipment.
7. Wire the Y and G terminals on the Module to the
Y (Compressor Relay) and G (Fan Relay) termi-
nals on the HVAC equipment.
TERMINALS
R
24V
C
24V Common
Y
Cooling relay
G
Fan relay
K
Communication
69-2065EFS-09

Publicidad

loading

Resumen de contenidos para Honeywell Home THP9045A1023

  • Página 1 THP9045A1023 Wiring Module INSTALLATION INSTRUCTIONS FEATURES WIRESAVER THERMOSTAT • Can be used when a common wire is required. • Mounts easily on or near HVAC equipment. INSTALLATION Rc K C W-O/B THP9045A 1. The THP9045 Wiring Module can be equip- ment- or wall-mounted in any orientation or as dictated by the surroundings.
  • Página 2 THP9045A1023 WIRING MODULE THX9321R SUBBASE WIRESAVER CONVENTIONAL USED USED Rc K C W-O/B AUX/E THP9045A Rc Y G C W-O/B USED USED USED FURNACE HEAT PUMP M31302B Fig. 1. Example wiring diagram for 1H/1C conventional application. THX9321R SUBBASE CONVENTIONAL WIRESAVER...
  • Página 3 THP9045A1023 WIRING MODULE THX9321R SUBBASE WIRESAVER CONVENTIONAL USED USED AUX/E Rc K C W-O/B THP9045A Rc Y G C W-O/B USED USED USED HEAT PUMP Y2 W2 AIR HANDLER M31306B Fig. 3. Example wiring diagram for a 2H/2C conventional application.
  • Página 4 Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées. Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc. Este producto es fabricado por Resideo Technologies, Inc. y sus afiliados.
  • Página 5 Module de câblage THP9045A1023 NOTICE D'INSTALLATION INSTALLATION PROTECTEUR DE FIL THERMOSTAT 1. Le module THP9045 peut être installé sur le système de CVCA ou sur un mur. Le sens de montage n'a pas d'importance et dépend l'emplacement. 2. Il n'est pas nécessaire d'installer le module...
  • Página 6: R Y G C Wsistema De Calefacción

    MODULE DE CÂBLAGE THP9045A1023 PROTECTOR SUBBASE THX9321R DE CABLE CONVENTIONAL USED USED Rc K C W-O/B AUX/E THP9045A Rc Y G C W-O/B USED USED USED SISTEMA DE CALEFACCIÓN HEAT PUMP MS31302B Fig. 1. Exemple de schéma de câblage pour une application conventionnelle à...
  • Página 7 MODULE DE CÂBLAGE THP9045A1023 PLAQUE DE RACCORDEMENT THX9321R PROTECTEUR DE FIL CONVENTIONAL USED USED AUX/E Rc K C W-O/B THP9045A Rc Y G C W-O/B USED USED USED HEAT PUMP APPAREIL DE CHAUFFAGE MF31305B Fig. 3. Exemple de schéma de câblage pour une application conventionnelle à...
  • Página 8 Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées. Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc. Este producto es fabricado por Resideo Technologies, Inc. y sus afiliados.
  • Página 9: Módulo De Cableado

    Módulo de cableado THP9045A1023 INSTRUCCIONES DE INSTALACIÓN CARACTERÍSTICAS PROTECTOR DE CABLE TERMOSTATO • Puede utilizarse cuando se necesite un cable común. • Se monta fácilmente en o cerca de un equipo HVAC. Rc K C W-O/B THP9045A INSTALACIÓN 1. El módulo de cableado THP9045 puede mon-...
  • Página 10 MÓDULO DE CABLEADO THP9045A1023 PROTECTOR SUBBASE THX9321R DE CABLE CONVENTIONAL USED USED Rc K C W-O/B AUX/E THP9045A W-O/B Rc Y G C USED USED USED SISTEMA DE CALEFACCIÓN HEAT PUMP MS31302B Fig. 1. Ejemplo del diagrama de cableado para la aplicación convencional de 1 etapa de calefacción/1 etapa de refrigeración (1H/1C).
  • Página 11 MÓDULO DE CABLEADO THP9045A1023 PROTECTOR SUBBASE THX9321R DE CABLE CONVENTIONAL USED USED AUX/E Rc K C W-O/B THP9045A Rc Y G C W-O/B USED USED USED HEAT PUMP Y2 W2 CONTROLADOR DE AIRE MS31306B Fig. 3. Ejemplo del diagrama de cableado para la aplicación convencional de 2 etapas de calefacción/2 etapas de refrigeración (2H/2C).
  • Página 12 Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées. Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc. Este producto es fabricado por Resideo Technologies, Inc. y sus afiliados.