Technical Data; Lubrication / Servicing - Monti MBX Bristle Blaster 3500X Manual De Instrucciones

Operating instructions
GB
8.

Technical data

®
Technical data: MBX Bristle Blaster
Technical data: Pressure regulator
Noise figures
Vibration figures
8.1

Lubrication / servicing

Lubrication
If the tool is new, ensure the compressed air motor is lubricated prior to operation. If a series lubrication device is not
used, add a few drops of light oil to the compressed air connection daily. Correct lubrication will ensure longer tool
service life.
20
All manuals and user guides at all-guides.com
®
3500X
Air consumption ....................................................... Litre/min. (CFM) Ø 500 (17,5) ± 10 %
Compressed air connection ........................................................................................R 1/4"
Necessary hose size.................................................................................. 3/8" ID (9,5 mm)
Weight .........................................................................................................................1,2 kg
Max. inlet pressure ..................................................................................... 25 bar (362 psi)
Compressed air connection ....................................................................................... G 1/4"
Weight ............................................................................................................................25 g
No-load (not under load)
No-load (not under load)
With 23 mm belt
With 11 mm belt
The A-weighted noise level of the tool is typically:
Sound pressure level L =83.2 dB(A), sound power level L
PA
Wear hearing protection!
Belt
® ®
MBX
Bristle Blaster belt
® ®
MBX Bristle Blaster belt
Without
MBX
Flow pressure
bar (psi)
6,2 (90)
5,2 (75)
6,2 (90)
5,2 (75)
=88.51 dB(A).
WA
Width Motor
a / m/s²
hw
11 mm 0,77
23 mm 2,03
0,15
® ®
Bristle Blaster 3500X
Speed
revs/min.
3.500 ± 5 %
3.200 ± 5 %
2.300 ± 5 %
2.300 ± 5 %
Handle
a / m/s²
hw
0,99
1,93
0,17