ACU-RITE IOB 610 Modo De Empleo página 8

2.5 Obligations of the operating
company
The operating company owns or leases the product and
the peripherals. It is responsible that the intended use is
complied with at all times.
The operating company must:
Assign the different tasks to be performed on the
product to appropriate, qualified, and authorized
personnel
Verifiably train personnel in the tasks they are allowed
to perform and how to perform them
Provide all materials and means necessary in order for
personnel to complete the assigned tasks
Ensure that the product is operated only when in
perfect technical condition
Ensure that the product is protected from unauthorized
use
2.6 General safety precautions
The safety of any system incorporating the use
of this product is the responsibility of the
assembler or installer of the system.
8
The product supports the use of a wide variety
of peripheral devices from different
manufacturers. HEIDENHAIN cannot make any
statements on the specific safety precautions
to be taken for these devices. The safety
precautions provided in the respective
documentations must be observed. If no such
information has been supplied, it must be
obtained from the manufacturers concerned.
The specific safety precautions required for the individual
activities to be performed on the product are indicated in
the respective sections of these instructions.
ACU-RITE | IOB 610 | Operating Instructions | 06/2019