General Instructions; Special Safety Instructions - Denios KTC-Station Guia De Inicio Rapido

Betriebsanleitung
English

1. General Instructions

The general instructions for storage systems, material no. 103041, in the current version, must be observed.
National standards and safety regulations must be observed.

2. Special safety instructions

The storage of flammable liquids included in the European VbF hazardous materials classifications AI,
AII and B (also R10, R11 and R12 classifications included in regulations governing hazardous materi-
als) is prohibited.
If you are storing liquids included in the groups below, evidence of the density and media resistance of the sump
materials is not required:
•
Watery solutions from organic acids up to 10%, mineral acids up to 20% such as acidic hydrolysing salts in
watery solutions (pH<6), apart from hydrofluoric acid, oxidising acids and their salts.
•
Inorganic alkalis such as alkaline hydrolysing salts in watery solutions (pH>8) apart from ammonia solu-
tions and oxidising solutions from salts (for example hypochlorite).
•
Inorganic solutions, non-oxidising salts with pH values between 6 and 8.
3. Use and intended purpose
The stations are use for the safe storage of KTC's (cubic tank containers) and IBC's.
Only store substances to which the material of the sump is resistant.
See the General Operating Instructions.
4. Technical details
Design
The IBC station is manufactured from polyethylene and is compliant with European building regulations. The
sump capacity is 1100 litres.
5. Assembly
Place the sump on level ground.
-
Put the supports together (see picture).
-
Put the dispensing platform together (see picture).
-
Place the grids on top.
-
The accessories facilitate loading, storage and dispensing from IBC station.
-
Information concerning the use of the IBC mono/duo stations
When using the IBC station Mono model,
-
a 260 mm long tube with a foot at the end
should be used as a strut.
When using the IBC station Mono model, a 80 mm long tube with a foot at the end
-
should be used as a strut.
When using an IBC station with a galvanized grid, remove the tap from the IBC and use the extension
-
tap.
Load max. 100 kg
-
Do not use the dispensing tray for storage.
-
6. Specifications
See type label.
KTC-Station
114702, 114709, 114706, 114711, 114716, 114720
Seite 5 von 12 Seiten Ausgabe 06/2007