Tools Required - Garden Wood Furniture SIENNA 998KFSIc Instrucciones Para Armar

ASSEMBLY INSTRUCTIONS
Phillips Screwdriver, Slotted Screwdriver, Mallet or Padded Hammer, Outdoor Wood Glue
c
1) Spread glue in the elongated holes in the Top Support (2c). Insert the Legs (4c), with the
holes for the barrel nuts facing in, into the elongated holes. Fasten Legs in place with a
Barrel Bolt (A) through the Top Support (2c) into a Barrel Nut (B) in each leg.
Attach the Base (3c) to the other end of the Legs (4c) in the same way.
Screw Leveler (D) into Insert (C) and tap into the hole in the bottom of each foot.
Insert Plastic Plugs (G) into the legs to cover the barrel nut holes for the base.
NOTE: The barrel nuts (B) have been notched to allow a slotted screwdriver to be
used to rotate the nut so that the holes align to the 6x60mm Barrel Bolt (A).
998KFSIc 48" Round Dining Table

TOOLS REQUIRED:

c
c
c
c
c
c
c
c
c
c
c
c
998KFSIc – Page 3