Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Model #
987KFSI1
SIENNA FINISH
36" Pub Table
Assembly Instructions
Your piece of GardenWood furniture has been finished
at the factory with a tinted, penetrating oil that contains
both UV and anti-fungal inhibitors. For best results, es-
pecially in extreme climates, another coat of protective oil
is recommended before using for the first time. A surface
coating is vital for the protection of your furniture. Treat-
ment should be applied at least once or twice a year.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed
Production Code:
We will replace any
Rev. 10/05
Publicidad
Manuales relacionados para Garden Wood Furniture 987KFSI1
Resumen de contenidos para Garden Wood Furniture 987KFSI1
- Página 1 Model # 987KFSI1 SIENNA FINISH 36" Pub Table Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
- Página 2 987KFSI1 36" Pub Table – Parts BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. ITEM 1 Top ....1 2 Top Support .
- Página 3 987KFSI1 36" Pub Table ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Slotted Screwdriver, Mallet or Padded Hammer, Outdoor Wood Glue STEP 1 1. Spread glue in the elongated holes in the Top Support (2). Insert the Legs (4), with the holes for the barrel nuts facing in, into the elongated holes. Fasten Legs in place with a Barrel Bolt (A) through the Top Support into a Barrel Nut (B) in each leg.
- Página 4 3. Attach a Brace (5) to inside edge of each leg and the Top Support with Phillips Screws (E) through the predrilled holes in the Braces. STEP 4 4. Insert Plastic Plugs (G) into the legs to cover the barrel nut holes for the base. 987KFSI1 – Page 4 Page 4 – 987KFSI1...
- Página 5 Modelo # 987KFSI1 ACABADO SIENNA Mesa Pub 36" Normas para obtener servicio: Reemplaza- Instrucciones para Armar remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax,...
- Página 6 Niveladoras (C+D) en los orificios que 4. Inserte los Tapones de Plástico (G) en se encuentran en la parte inferior de las patas para cubrir los orificios de los cada base. tuercas cilíndricas de la base. Page 2 – 987KFSI1 SP...
- Página 7 No. de modèle 987KFSI1 FINI SIENNA Table Pub 36" Politique de service : Nous remplacerons toutes les pièces défectueuses, manquantes ou Instructions de Montage endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
- Página 8 ÉTAPE 4 calage (C+D) dans les trous ménagés au 4. Introduisez les bouchons en plastique (G) bas de la base. dans les pieds, de manière à couvrir les trous des manchons taraudés de la base. Page 2 – 987KFSI1 FR...
- Página 9 Presented by Whittier Wood Products In order to maintain the appearance and life of this GardenWood Furniture™ product, please follow these instructions. Finishing Tips A surface coating is vital for the protection of your furniture. Treatment should be applied at least once or twice a year.