Honeywell Home 50001137-001 Instrucciones De Instalación página 4

50001137-001, 50002883-001 COVER PLATE ASSEMBLIES
Mount Medium or Large Cover Plate to a Vertical 2 in. X 4 in. Electrical Box (See
Fig. 3)
1. Position the bracket on the electrical box. Insert two #6-32 X 5/8 flat head screws. Check leveling, if
desired, and tighten the flat head screws.
2. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall
plate on the bracket with the arrows pointing up.
3. Insert two #6-32 X 1/4 pan head screws and tighten.
Fig. 3. Mount bracket, cover plate, wall plate and thermostat to a vertical 2 in. X 4 in. electrical box.
69-2660EFS—02
ELECTRICAL BOX
WIRE
BRACKET
# 6-32 X 5/8 FLAT HEAD SCREWS (2)
COVER PLATE
WIRE HOLE
MOUNTING HOLES (4)
4
WALL PLATE
WIRE HOLE
MOUNTING HOLES (2
#6-32 X 1/4 PAN HEAD SCREWS (2)
THERMOSTAT
M22392A
)