Installation And Use - Gigaset Smoke Sensor 2.0 Guía De Instalación Y Funcionamiento

OPERATING AND INSTALLATION GUIDE

INSTALLATION AND USE

1.
Insert the batteries. Note the correct polarity.
Inserting a CR123A 3V battery changes the smoke
x
alarm to registration mode.
2.
Register Smoke Sensor 2.0 to your base station.
Move the smoke alarm near to your base.
x
Start the Gigaset elements app.
x
In the app, click on "Elements"
x
and select "smoke", then follow the instructions
on the screen.
Smoke Sensor 2.0 is then connected to Gigaset
x
elements and is shown in the overview of the app.
, press add "+"
35