Instruction For Correct Operation; Preparation Before Use - Eco-De EMS ECO-306 Manual

Components of principle unit and function:
1. Output jack; for connecting the output electrode.
2. LCD real-time display of the output status.
3. On/Off switch; start/ deepen/ cancel'' deepen''/ turn off
4. English display button
5. Manual button: there are therapeutic modes available: thumping, massage,
acupuncture, napapathy, cupping, weight reducing, immunotherapy and massage.
If you press this button once, a new therapeutic mode is set. The eight modes are
automatically acupuncture used.
6. Time selection button: time will be increased (5 or 15 minutes)
7. Intensity enhancing button: there are 15 intensity levels which can be set.
8. Intensity reducing button.
II. Instruction for correct operation:

1. Preparation before use

- Battery installation:
1. Push of the battery deck cover and open the deck.
2. Insert three batteries, pay attention to polarity.
3. Close the deck cover firmly
- Preparation of electrodes:
1. Peel of the smooth film on the adhering pad.
2. Put the adhering pads on the chord winder after use
-Placing electrodes:
1. Wipe the position of body to be massaged with a wet towel to remove oil, dirt,
sweat and make up.
2. Stick the electrodes directly onto the skin to be massaged.
3. Treatment cannot be effective unless both of the two electrodes are placed onto
the body surface, it is not necessary to place the two electrodes symmetrically.
5