Ezviz Vault Live Guia De Inicio Rapido página 7

Setup
Powering on
The camera should be within 10m (32.8ft) from the Vault Live.
1. Power on the Vault Live using power adaptor and power socket.
Use stable power supply to avoid device exception or even damage.
2. Wait until the Wizard interface appears on the Monitor and set the password (For First Time Access).
3. Log in the Vault Live.
(Optional) Shutdown
1. In the operation interface of Vault Live (Monitor), go to Shutdown by Menu
2. Click Yes.
For device protection, do not power off it when it is still working.
Linkage
Linking through Monitor
Power on all devices before you start.
Quick Linkage for Wireless Camera
Restore the camera if it has been connected to Wi-Fi before
Power Adaptor
3
Power Socket
Shutdown and click it.