Note: If you press the TALK button(15) while listening to a found
channel, the Radio's will go back in stand-by mode on the found
channel.
11. Call Tones
A call tone alerts others that you want to start talking.
1. Setting the Call Tone
The Twintalker has 10 call tones.
• Press the MENU- button(11) four times, "CA" is displayed and the
current call tone is flashing.
• Press the
Tone.
• Press the TALK - button(15) to confirm and return to stand-by Mode.
2. Sending a call Tone
Press the CALL-button(12) briefly. The call tone will be transmitted on
the set channel.
12. Key-Tone On/Off
When a button is pressed, the unit will beep briefly. To set the key-tone.
• Press the MENU- button(11) five times. "tO" will be displayed.
• Press
to enable (ON) or
• Press the TALK - button(15) to confirm your selection and return to
the standby mode.
13.Roger Beep On/Off
After the TALK-button is released, the unit will send out a roger beep to
confirm that you have stopped talking.
To set the Roger Beep.
• Press the MENU- button(11) six times. "rO" will be displayed.
• Press
to enable (ON) or
• Press the TALK - button(15) to confirm your selection and return to
the standby mode.
-button(4) or the
-button(7) to change to another Call
disable the Key Tones (OF).
disable the Roger Beep (OF).
EN-8