Connecting Video Equipment To The Lcd Screen - Sony PS one SCPH-131 Manual De Instrucciones

Connecting video equipment to the LCD screen

You can use the LCD screen (for PS one
and other devices. Connect the device to the PS one
cable (sold separately) through the AV IN jack on the LCD screen rear.
Choose an AV cable that matches the AV output jacks of the device, and
connect it as shown in the diagram below:
To AV output jack (mini-jack) of
camcorder or digital camera
To AV output jacks of
VCR or DVD player
When an AV cable is connected, the LCD screen automatically detects the
signal of the connected device. To begin viewing, simply start playback
on the device.
Notes
• Video played from a connected device cannot be viewed on a TV screen even if
the TV is connected to the PS one
• The plug shown in the diagram at right
matches the AV signal layout of the AV IN
jack (mini-jack) on the LCD screen rear.
Signal layout may vary depending on the
device or cable connected. In some cases,
even if you connect as shown in the
diagram above, the signal will not be
transmitted properly. For details on the AV
signal layout of the device to be connected,
refer to the instructions for the device.
™
) to view video from camcorders
SCPH-180 AV
U
connection cable
(sold separately)
AV cable (VCR type)
(sold separately)
™
console through the LCD screen.
™
console with an AV
To AV IN jack
Audio (right)
GND
Video
Audio (left)
23