Publicidad
Idiomas disponibles
Idiomas disponibles
UK
D
F
NL
ESP
N
S
FIN
JENSEN EXACT COMFORT ADJUSTMENT
DK
INTRODUCTION
Congratulations on the purchase of your Jensen Exact Comfort Adjustment.
We are sure that you will enjoy sleeping and relaxing in this bed for many
PL
years to come. We recommend that you study this handbook carefully
before you start assembling and installing the bed.
GUARANTEE
A 5 year guarantee covers normal usage of the Jensen Exact Comfort
ITA
Adjustment. The receipt bearing the date of purchase is also your
certificate of guarantee. In the event of any faults or malfunctions, please
contact the shop at which you purchased the bed.
PT
ASSEMBLY / START
1.
Check whether all the parts have been delivered by referring
to the overview on the folder's left-hand fold-out page.
2.
Remove transport security safeguard.
3.-7.
See overview on the folder's left-hand fold-out page.
8.
It is advisable to let the bed stand on its side or lie upside-down while
you are configuring the remote control. Connect the power by inserting
the plug into the wall socket. Wait 5 seconds.
Press the "+" and "-" buttons down simultaneously for about three seconds
until a short, steady light appears under the motor. The motor and remote
control are now paired.
USING THE REMOTE CONTROL
The bed can be adjusted to the desired firmness by using the remote
control. Press "+" for a firmer comfort and "-" for a softer comfort.
"=" brings the bed into the neutral position.
NOISE
A mechanical and electrical bed generates noise. In most instances, the
amount of noise that the bed makes depends on the acoustics of the room
in which the bed is situated.
4
4
USAGE
The bed's motor is not designed for continuous usage. Avoid shortening
the bed's operating life by ensuring that the motors do not operate for
longer than 2 minutes during an 18 minute period. Any attempt to exceed
this degree of usage will reduce the life of the product and may render the
guarantee invalid.
The bed has been constructed in such a way that it can bear a maximum
weight of 150 kg, distributed naturally across the entire surface of the bed
between the head end and the foot end. Any attempt to exceed this load
will damage the product and render the guarantee invalid.
DETECTING MALFUNCTIONS
Never open motors, electronic components or the remote control yourself.
The manufacturer will not accept any liability if the motors, electronic
components or the remote control are opened by someone other than
certified maintenance staff. New components and parts must be purchased
from the manufacturer.
NB! Keep the remote control out of the reach of children.
ELECTRICAL DATA
Input: 230VAC / 24VDC
Standby power: Max 0,1W
With our new app for Jensen Exact Comfort adjustment
you can easily adjust the firmness of your bed.
Publicidad
