Helpful Hints; Cleaning And Maintenance - essentiel b EPCM1 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5. Place a large bowl beneath the Popcorn Makers chute to catch the popcorn.
6. Insert the plug into a power outlet and switch on the appliance.
7. After a few moments, the popcorn will shoot out the chamber and into the bowl.
8. When it is finished popping, turn off the appliance and remove the plug from the socket.
WARNING: wait for the unit to cool down at least 5 minutes between each cycle, otherwise the
corn will heat up too much and will not pop.
WARNING: turn off the unit after each end of cycle by pressing the ON/OFF switch, otherwise
it will restart by itself after a few minutes.
CAUTION: DO NOT TOUCH THE POPCORN MAKER COVER DURING OR IMMEDIATELY
AFTER OPERATION. THE UNIT WILL BE EXTREMELY HOT.
Note:
This device is made with an anti-overheating safety that stops the functional after about 2
mins.
Never run the unit empty.
A small number of unexploded corn can be ejected from the device, this is normal and
depends on the quality of the corn used as well as the filling of the measuring spoon.
For best results we advise to not fill the spoon to its maximum (approx. 50g of corn) but at
¾ (approx. 35g of corn).

HELPFUL HINTS

1. This product uses hot air circulation in the popping chamber to pop the kernels. To avoid
damage to your Popcorn Maker, never add butter, oil or any other substance to the
popping chamber.
2. Never use microwave popcorn in your Popcorn Maker.
3. Use only fresh and dry popcorn kernels. Old or stale kernels may cause scorching or
smoking during operation.
4. Take care when selecting the bowl for catching your popcorn.
(1) A metal bowl may become hot, exercise caution when moving the bowl.
(2) If using a plastic bowl, ensure it can withstand the heated air which flows from the
Popcorn Maker while in use.

CLEANING AND MAINTENANCE

1. Turn off the popcorn maker and ensure it is unplugged from the power supply.
2. Ensure the appliance has cooled fully prior to cleaning, reusing or storing.
3. Wash the transparent cover and measuring spoon in warm soapy water, rinse and dry
thoroughly.
4. Use a soft, dry cloth to wipe the internal popping chamber.
5. Clean the base of the unit with a damp cloth and dry thoroughly.
6. Never immerse the Popcorn Maker's body, cord set or plug in water or any other liquid. Do
not place any part of the appliance in a dishwasher.
7. Do not use abrasive cleaning products on this appliance.
8. Store the assembled appliance in a clean, dry area.
- 15 -

Publicidad

Tabla de contenido
loading

Tabla de contenido