Assembly Instructions
9
J
10
Left Bottom Pivot Hinge
(1 used in this step)
⑩
9
11
K
M3.5 x 12 mm
Pan Head Screw
Right Bottom Pivot Hinge
(4 used in this step)
(1 used in this step)
⑪
⑨
23. Using the pilot holes as a guide, fit the Left Bottom Pivot Hinge (10) to the Left Door (J) with two 12
mm Pan Head Screws (9). Make sure that the pivot pin points towards the against edge.
24. Repeat the same procedure to attach the Right Bottom Pivot Hinge (11) to the Right Door (K).
20