Programming Instructions - Program Mode; Set Water Budget By Month (Advanced Feature); Set The Watering Schedule - Signature Control Systems EZ Pro Jr. Indoor 8200 Serie Guía De Instalación Y Programación

PROGRAMMING INSTRUCTIONS - PROGRAM MODE

If % WATER BUDGET is set for 110% or greater, the EZ Pro
the run time in half to reduce runoff. Half of the calculated run time will operate
for each zone in that program, followed by the second half of the run time for
each zone.
NOTE: % WATER BUDGET is changeable by program. If you have programming
in A, B, and C, you must enter three water budget values if you want
every program to be changed.

Set Water Budget by Month (Advanced feature)

™
The EZ Pro Jr. allows you to set % WATER BUDGET by month. This feature
allows you to customize your program by month over the year to allow for hot
dry months and cooler wetter months.
Turn the large dial to the % WATER BUDGET position. Press both
SELECT '+' and SELECT '–' together. Use the SELECT to select months 1-12.
Use the ADJUST to choose the desired percentage amount from 0-200%.
If 0% is chosen, no watering will take place in that month.
Set the Watering Schedule (A quick note on scheduling and the EZ Pro
™
The EZ Pro Jr. Indoor controller has three scheduling options plus the option
for Event Days Programming:
• WATER DAYS, or daily, lets you choose which days of the week you want
to water (i.e., Monday, Wednesday, Friday only).
• ODD/EVEN tells the controller to water on either the odd or even days of
the month (i.e., the controller will water on the 31st and the 1st when an
ODD schedule is chosen).
™
Jr. Indoor will split
™
Jr....)
11