Toguard H40 Trail Camera Manual De Instrucciones página 9

2.Instead of type LR6 (AA) batteries with the same specification (with
2000 mAh or higher) may be used. We recommend NiMh batteries
with low self discharge (not supplied).
3.The camera must be inserted 4 or 8 x 1.5V AA batteries . Do not use
new and old batteries together. DC interface need 6V/1.5A adaptor
with 3.5 mm (outer diameter) *1.3 mm (inner) plug head.
4.Insert CLASS6 or higher class micro SD card ( CLASS10 recommend).
Prior to insert into memory card, ensure that the lateral write protection
on the memory card has not been locked.
5.Switch on the camera. 3 switches: power off (OFF),setup menu
/ SETUP mode (SETUP)and live mode ( ON).
6.New memory card is recommended to be formatted when using (as
below described).
7.Please note that the camera will power off when power is very low.
AALR6
AALR6
AALR6
AALR6
AALR6
AALR6
AALR6
AALR6
Operation (See Figures Below)
Open the locking brackets and the protective cover of the battery
compartment - insert batteries -insert memory card—switch to
SETUP—enter system menu by pressing MENU button-choose to format
memory card—choose to reset to factory.
SHOT
OK
AV ON-SETUP-OFF
Settings
Time&date
Photo stamp
Password protection
Beep sound
Format memory card
Serial NO
Back Select
OK
MENU
5
ON-SETUP-OFF
Settings
Time&date
Notification:All data
Photo stamp
will be deleted
Password protection
Beep sound
Yes
Format memory card
No
Serial NO
Back Select
OK
MENU
EN