How To Use - RugDoctor PDC-1 Manual Del Usuario

How to Use:

Filling The clean water tank
1
Locate the Clean
Water Tank
The Clean Water Tank is
the tank located on the
back of the machine.
3
Fill the Clean Water Tank
Unscrew the Easy Measure
Solution Pour Cap from the
Clean Water Tank.
Fill the Clean Water Tank with
HOT tap water until it reaches
the fill line.
4
Adding Rug Doctor Cleaning Solution
Follow the directions on the back
of the Rug Doctor cleaning solution
and fill the Easy Measure Solution
Pour Cap with the recommended
ounces of solution.
Clean water tank holds 1.5 gallons
of water.
Tightly screw the Easy Measure
Solution Pour Cap onto the tank.
8
Fill Line
Pour Cap
R U G D O C T O R P R O D E E P C A R P E T C L E A N E R
2
Access the Clean Water Tank
Push the Clean Water
Tank Release Button
and pull the tank in
an outward motion
to release tank.
REMEMBER
Always use RUG DOCTOR
deep cleaning solutions.
Other cleaning solutions may harm
the machine and void the machine
and carpet warranties.
5
Now You're Ready to Clean
Securely place
the full Clean
Water Tank
back onto the
machine. You
will hear a click
sound when the
tank has locked
into place.
| U s e r M a n u a l