Grasslin talento smart B15 Instrucciones De Manejo página 17

Description of function
The DIN-rail timer is a timer that is installed on a DIN rail (Fig. 1/
timer activates the connected device. The DIN-rail timer has one or two channels and can be operated
via a display (Fig. 1/
5
manually or via a mobile device. The radio signal frequency is 2.4 GHz and the maximum transmission
power is 1.8 mW.
Technical data (DIN EN 60730-1)
Mode of operation
Pollution degree
Rated impulse voltage
The technical data for the devices described in this manual can be found at:
http://qrc.graesslin.de/talento-smart-specs.
) with four control buttons (Fig. 1/
1.B
2
4000 V
) by means of a click system; the
1
). The DIN-rail timer can be programmed
6
EN
17