Maintenance And Storage; Environmental Information - Flymo EasiCut 5500 Manual De Instrucciones

Ocultar thumbs Ver también para EasiCut 5500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
means at all times and especially when
switching on the motor.
10. Do not use stepladders whilst operating the
product.
11. Remove the plug from the mains :-
-
before leaving the product unattended for any
period;
-
before clearing a blockage;
-
before checking, cleaning or working on the
appliance;
-
if you hit an object. Do not use your product
until you are sure that the entire product is in a
safe operating condition;
-
if the product starts to vibrate abnormally.
Check immediately. Excessive vibration can
cause injury.
• Awareness of the environment must be
considered when disposing of 'end-of-life' product.
• If necessary, contact your local authority for disposal
information.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment.
Your product is uniquely identified by a silver and black product rating label.
We strongly recommend that your product is serviced at least every twelve months, more often in a professional
application.
If any part is found to be defective due to faulty
manufacture the guarantee period, Husqvarna Outdoor
Products, through its Authorised Service Repairers will
effect the repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the Authorised
Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and
tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
SAFETY PRECAUTIONS

Environmental Information

Service Recomendations
GUARANTEE AND GUARANTEE POLICY
-
before passing to another person.

Maintenance and storage

1.
Keep all nuts, bolts and screws secure to be
sure the product is in safe working condition.
2.
Replace worn or damaged parts for safety.
3.
Be careful during adjustment of the product to
prevent entrapment of the fingers between
moving blades and fixed parts of the machine.
4.
After use the product should be stored using the
blade cover provided.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
For more detailed information about recycling of this
product, please contact your local council office,
your household waste disposal service or the shop
where you purchased the product.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
* Replacing Cutting Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in this Operator's Manual.
* Machines used for hire are not covered by this
guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular
maintenance and are, therefore not normally subject
to a valid warranty claim: Blades, Electric Mains cable,
* Caution!
Husqvarna Outdoor Products does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts
or additional parts that are not either manufactured or
approved by Husqvarna Outdoor Products, or by the
machine having been modified in any way
ENGLISH - 2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Easicut 6000xtEasicut 6500xtEasicut 7000xt

Tabla de contenido