AquaMedic aquafit 1 Manual De Instrucciones página 5

aquafit 2:
1. Ceiling suspension
2. Retaining bush for ceiling suspension
3. Ferrule
4. Stainless steel wire
5. Lamp fixing
6. Non-return cap
aquafit 3:
Fig. 3: aquafit 3
1. Ceiling suspension
2. Retaining bush for ceiling suspension
3. Ferrule
4. Stainless steel wire
5. Lamp fixing
6. Non-return cap
7. End of wire
Mounting:
The ceiling suspension (1) must be securely screwed to the ceiling. Suitable screws and pegs are
provided but you should ensure your ceiling is capable of holding the weight of the light in this
way. Depending on your ceiling, it may be necessary to use special cavity plasterboard fixings or to
screw through into blocks you have fitted behind the ceiling.
The stainless steel wire (4) is now fed through the retaining bush (2) of the ceiling suspension (1)
so that the ferrule (3) is retained inside the ceiling suspension. The retaining bush is screwed onto
the ceiling plate allowing the stainless steel wire to hang free.
7. End of wire
8. Locking screw
9. Allen key for tightening the locking screw
10. Light fixing
11. Peg
12. Screw
8. Locking screw
9. Nut for light fixing
10. Light fixing
11. Peg
12. Screw for peg
13. Screw for light fixing
5