Wiring - Jensen MWR21 Manual Del Usuario

MWR21

Wiring

Once the remote has been mounted, route the cable through the cutout
and connect the cable to the radio as illustrated in the wring diagram.
The 20 foot extension cable supplied with the MWR21 may be used to
connect the remote to the radio. Up to two additional extension cables
(MWREXT) may be purchased and used to extend the reach of the
remote up to 60 feet.
When connecting the cables, be sure to route the extension cable away
from sharp objects, corners, and places where it might get pinched, as this
could affect performance and cause damage to the unit.
Note: An optional Y-adapter cable (MWRYCBL) is available from
Jensen. Combining these cable adaptors allows up to four MWR21
remote control units to attach to the head unit.
Wiring / Instalación Eléctrica / Installation électrique
10