Testing
To test that connections have been properly made, turn ignition switch on
and push PWR to turn on the radio. The remote and radio should light up.
If not, check the power connection cable.
Troubleshooting
Problem
Remote not operating
Illumination not working
Note: Do not expose remote to extremely high or low temperatures.
Avoid splashing water directly on the unit. The remote is water
resistant, not waterproof.
Corrective Action
Ensure cable is securely connected at both ends;
ensure cable was not pinched or cut during installation
Check that lamp is not burned out
Testing
Experimentación
Prueves
12
MWR21