Product Characteristics - Ebode IPCAM60 Guia De Inicio Rapido

2. PRODUCT CHARACTERISTICS:

In Colli:
Weight Colli:
Volume Colli:
Length Colli:
Width Colli:
Height Colli:
Length Product Carton:
Width Product Carton:
Height Product Carton:
Weight Article:
EAN Code EU:
3. VIEWING BY PHONE APP
1. Download the App:
Search and download the free Mycam app in the Apple Store or Google Play or scan below QR
codes which will link you to the download page.
IOS APP
2. Setup the camera:
Option one: Using network cable (Method 1/2/4)
 Plug the power adaptor into the camera.
 Plug the network cable into the camera for connection to your router.
 It will take approximately 30 seconds to boot up the camera, when the power is on and the
network cable is connected, the green LED (for power) on the rear panel will stay on. The
yellow LED (for network) will keep flashing.
 Run the App, and click "Add camera".
Method 1 - Scan QR Code: Follow the instructions in the app to scan the QR Code sticker at the
bottom of the camera and Enter the default password "000000" to finish the settings.
Method 2 - Scan Local Network:Scan the complete IP camera P2P account (shown on the IP
Camera's QR code) in the same scope of Local LAN network as your phone WIFI connected.
Enter the default password "000000" to finish the settings.
6-12-2016
All manuals and user guides at all-guides.com
8 Pcs
16,0 kg
0,112 CBN
68,0 cm
55,0 cm
30,0 cm
27,2 cm
16,8 cm
29,2 cm
1,83 kg
8717399103671
Mycam App Logo
- 3 -
Android App
ebode IPCAM60