Intended Use; Items Supplied - Hilti TE 6-CL Manual Del Usuario

damaged. Do not touch the supply cord or extension cord if it is
damaged while working. Disconnect the supply cord plug from the
power outlet. Damaged supply cords or extension cords present a risk
of electric shock.
▶ Dirty or dusty power tools that have been used frequently for work
on conductive materials should be checked at regular intervals at a
Hilti Service Center. Dust (especially dust from conductive materials)
or dampness adhering to the surface of the power tool may, under
unfavorable conditions, lead to electric shock.
Work area
▶ If the work involves breaking right through, take the appropriate
safety measures at the opposite side. Parts breaking away could fall
out and / or fall down and injure other persons.
Personal safety
▶ Wear protective gloves. The rotary hammer may get hot during use.
There is a risk of injury (cutting or burning) if the accessory tool is touched
while changing it.
3 Description
3.1 Product overview
Chuck with dust cap
@
Depth gauge
;
Function selector switch
=
Control switch
%

3.2 Intended use

The product described is an electrically powered rotary hammer. It is
designed for drilling in concrete, masonry, drywall panel, wood, plastic and
metal. The rotary hammer can also be used for light chiseling work on
masonry and surface finishing on concrete.
▶ The power tool may be operated only when connected to a power supply
providing a voltage and frequency in compliance with the information
given on its type plate.

3.3 Items supplied

Rotary hammer, side handle, depth gauge, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
*2266071*
1
&
(
)
2266071
Grip
Forward / reverse switch
Side handle
English 7