7
7G
7A
7B
7 SLIDE BAR INSTALLATION
Insert the bottom of Slide Bar (7A) through Wall Mount Opening (7B). Remove Dome
Cap (7C) from Slide Bar (7A) and retain Packing Clamp (7D) in place. From above, insert
Dome Cap Slots (7F) to the top of Shower Arm (7G). From underneath align Slide Bar
(7A) to Dome Cap (7C) and thread Dome Nut (7H) by hand.
8
8B
8C
8A
8D
8 SHOWER DIVERTER INSTALLATION
Apply PTFE plumber's tape to all threaded ends of Shower Diverter (8A) according to
manufacturer's instructions. Screw Shower Diverter (8A) into the end of Shower Arm
(8B). Make sure Rubber Seal (8C) is retained inside Diverter Nut (8D).
9
9D
9A
9B
9 HOSE INSTALLATION
Place Rubber Seal (9A) inside Hose Fitting (9B). Connect Hose (9C) into Shower
Diverter (9D) by turning Hex Hose Fitting (9B).
7C
7F
7D
7H
7A
9C
ENGLISH
10
10 HAND SHOWER INSTALLATION
Place Rubber Seal (10A) inside Hose Fitting (10B). Connect Hand Shower (10C) to
Hose (10D) by turning Tapered Hose Fitting (10B) clockwise.
Make sure Hand Shower (10C) is securely tightened to Hose (10D).
11
11B
11D
11 SHOWER HEAD INSTALLATION
Thread Shower Head (11A) onto Shower Diverter (11B). Make sure Rubber Seal (11C)
is retained inside Shower Nut (11D).
Make sure Shower Head (11A) is securely tightened to Shower Diverter (11B).
3
10C
10A
10B
10D
11C
11A