Tv Menu Messages - Dell W2607C Manual De Usuario

TV Menu Messages

While using your LCD TV display, the following messages may appear.
Message
Auto Adjust
Out of Range
No Video Input
TV Button Lock
In Power Save Mode
Press any key on keyboard or
move mouse
In Power Save Mode
Please Check Video Signal
Self Test
Possible Solution
No action required, the LCD TV display is performing an auto
adjustment.
Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
Check that all cables are properly connected.
1
Ensure the proper source is selected in the Input Select menu.
2
See "Input Select Menu" on page 24 for more information.
To unlock, press Menu on your remote control, select Setup.
Use the side panel buttons to unlock the TV Menu and side
panel buttons:
Press the Menu button.
1
A message appears stating that the TV Menu and buttons are
locked.
While the message is on the screen, press the volume decrease
2
and channel up buttons on the side panel simultaneously.
A message appears stating that the TV Menu and buttons are
unlocked.
If you have a computer connected to the LCD TV display and
there is no signal detected, the LCD TV display goes in to sleep
mode. The power light is amber when the LCD TV display in is
sleep mode.
Press any key on the keyboard or move the mouse to wake the
LCD TV display.
If you are using a video device and it has been inactive for
30 minutes the LCD TV display goes in to power save mode. The
power light is amber when the LCD TV display is in power save
mode.
Appears for computer source when there is nothing plugged in.
Select VGA or DVI from Input Select menu and nothing is
plugged in. Plug a computer in to the VGA or DVI.
Troubleshooting Your LCD TV Display
35