Publicidad
Idiomas disponibles
Idiomas disponibles
7-1/2"
(19.1 cm) Max
Pump/Control
Access
20" (50.8 cm) W x
15" (38.1 cm) H
18"
(45.7 cm)
Product Information
Applicable product:
Drop-in rim style, custom pump
Fixture*:
Bathing well:
Basin area, bottom
46" (116.8 cm) x 24" (61 cm)
Basin area, top
54" (137.2 cm) x 27" (68.6 cm)
Weight
105 lbs (47.6 kg)
To overflow:
Water depth
14" (35.6 cm)
Capacity
63 gal (238.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58" (147.3 cm) x 34" (86.4 cm)
Pump:
V
1-speed
120
Minimum access panel
pump/control (required):
1014699-1-B
1-11/16"
(4.3 cm)
8-11/16" (22.1 cm)
60" (152.4 cm)
3-1/2"
(8.9 cm)
3"
(7.6 cm)
K-1239-CB
Hz
A
60
7.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
1" (2.5 cm)
2-7/8"
(7.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
44 lbs/square foot (214 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
36" (91.4 cm)
20"
18-1/2"
(50.8 cm)
(47 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
Kohler Co.
Publicidad
