Publicidad
MAINTENANCE
With regular care and the proper treatment your Go On furniture will keep their high prestations
during several years.
To maintain the quality of the product, use a clean and soft cloth slightly dampened with water
to clean the technological profile and the furniture.
Do not use bleach or other abrasive cleaners, it can permanently damage the product.
Cleaning and user maintenance shall not be made by children without supervision.
WARNINGS
Power connection must be executed through a onmipolar switch, directly connected to the
input terminals, it must have a separation in all their poles and also provide all pole disconnection
under overvoltage category III conditions, in the area where safety bathroom requirements will be
meet.
According to the rules in force, the switch and the other electronical devices, should be placed within
a definite area that is not achievable by a person who is using the bath (this is related to the
prohibition volume of the REBT).
• Zone 0
Inside the bath or shower tray itself.
• Zone 1
Area above the bath or shower tray to a height of 2,25 m (7' 4") from the floor.
• Zone 2
Area streching 0.6m (1' 11") outside the perimeter of the bath and to a height of 2.25m
(7' 4") from the floor. ANd the area around a wash basin, within a 0.6m radius of any tap.
• Zone 3
Anywhere outside zones 0, 1 y 2.
zone
60 cm
3
zone
2
zone
2
60 cm
zone
zone
1
2
- 12 -
Publicidad
