Tools Required - Garden Wood Furniture 967Wd Instrucciones Para Armar

967Wd Fan Back Adirondack Chair
ASSEMBLY INSTRUCTIONS
II
x4
FIG. 1
1) Loosely attach each Left and Right Leg (Bd & Ad) to the Seat Assembly (Hd) with
8x40mm Hex Bolts (II).
KK
x2
FIG. 2
2) Attach the Right and Left Back Supports (Cd & Dd) to the Seat Assembly (Hd) with one
4x35mm Wood Screw (KK) through the upper holes. The longer edge of the back supports
must be towards the front of the chair.
KK
x8
FIG. 3
3) Attach the Back Assembly (Gd) to the Seat Assembly. The angled edges of the back
supports must be under the upper brace on the back before screwing in place. Use 4x35mm
Wood Screws (KK) to attach upper back brace into the top edge of the Back Supports
(Cd & Dd) and the Lower Back Brace to attach to the Seat Assembly (Hd).
TOOLS REQUIRED: Phillips Screwdriver
Hd
II
Bd
Cd
Dd
KK
Hd
Gd
KK
KK
II
Ad
FRONT
KK
KK
II
JJ
967Wd – Page 3 – 3/08