Tools Required - Garden Wood Furniture 994Wd Instrucciones Para Armar

994Wd Adirondack Ottoman – Parts List
BEFORE BEGINNING ASSEMBLY, check that the quantities of
1d – Foot Rest– Qty. 1
Aa – 8x40mm Hex Bolt
– Qty. 8
ASSEMBLY INSTRUCTIONS
1) Attach the Left & Right Back Legs (2d & 4d)
and Left & Right Front Legs (3d & 5d) to the Foot Rest
(1d) with 8x40 mm Hex Bolts (Aa) through
the predrilled holes. The T-Nuts
should face toward the
center of the unit when
properly installed.
the parts received match those on the parts list.
2d – Left Back Leg
– Qty. 1
B – Hex Wrench – Qty. 1
TOOLS REQUIRED: Hex Wrench (provided)
1d
a
2d
3d – Left Front Leg
– Qty. 1
4d
a
3d
T -Nuts to face toward
center of unit when
properly assembled.
4d – Right Back Leg
5d – Right Front Leg
– Qty. 1
a
a
5d
994Wd – Page 2 Rev. – 4/08
– Qty. 1
a