Changing A Fingerprint Or Registering A New One - Siemens Fujitsu STORAGEBIRD Solo 25-UP Manual De Instrucciones

► Use the mouse to select the finger required and go to Next.
► Firmly run the selected finger at least three times over the fingerprint sensor of your device.
After successful registration of the finger, the Fingerprint Registration selection window reappears.
► Select another finger for registration.
or
► Select Exit.
A window for setting a password appears.
► Enter a password and a hint for your password.
► Select Confirm.
The "AP" drive will disappear. The encrypted "security" drive will be decrypted and displayed.
It can only be accessed after Fingerprint Verification is successful.
Changing a fingerprint or registering a new one
Requirement: You have already logged in by fingerprint or password and
the "security" drive is available.
► Left-click on the FingerVerify application in the symbol area of your task bar.
► Select User Settings - Fingerprint Registration.
Follow the instructions given in the chapter
A26381-F103-Z104-1-8N19, edition 1
"Registration of a fingerprint under Windows ", Page
STORAGEBIRD
4.
English - 5