SPORT-ELEC ELS-7188 Instrucciones De Uso página 8

BATTERY
To Insert Battery
Note : Use 1 "AAA" battery
1. Remove cap (Refer to Illustr.1).
2. Make sure unit is in the OFF
position (Refer to Illustr. 2)
3. Remove aluminium casting from
the main unit by sliding aluminium
casting off (Refer to Illustr.3)
4. Align the negative and positive
signs on the battery, with the
negative and positive signs inside
the main units
battery compartment.
5. Once battery is in place,
replace aluminium
WARNING : Unit will not work if
battery is placed in unit incorrectly.
MAIN HEAD
Using Unit with Main Head:
1. Turn unit ON by pushing ON/Off
casing.
ATTACHMENT
switch
upward in the direction of the arrow
(Refer to Illustr.5).
2. Place the head gen-
tly against the hair to
be removed.
3. Move in an upward
direction against the
growth of the hair to
be removed.
Note: use steps 1-3 for all
designated areas of the body.
To Clean Main Head Attachment :
Use cleaning brush provided to wipe away
any hairs (Refer to Illustr.7)
To Remove Hairs From Inside
of Main Unit Head.
1. Make sure unit is in the OFF posi-
tion.
2. Turn to the backside of unit (This
side is the side opposite the
power switch)
3. Push lock down to unlock main
head (Refer to Illustr.8). Note: Main
head should pop off from main unit.
4. Pull head down and remove from
main unit.
5. Remove hairs with cleaning brush
(Refer to Illustr.9)
6. Replace head by inserting the pro-
truding edge
8
into the
GB