Publicidad
Technical data
Battery:
rechargeable, no-maintenance lead-gel battery, 7 Ah
Output:
12 Volt DC voltage, 300 A start assistance (600 A peak)
Cable:
Rubber-insulated, copper conductor
Compressor: max. pressure 18 bar (260 PSI)
Description
1. 12 V - socket
2. Charging socket
3. Handle
4. Battery indicator
5. Main switch
6. USB socket
7. Pole clamps
8. LED working light
9. Compressor on/off switch
10. Compressor manometer
11. Pressure tube
12. Charging plug for cigarette lighter
13. Charging cable
14. Inflation adapter
Equipment: Compressor up to 18 bar
Adapter for inflating balls and leisure items
LED working light
12 V – output
USB output 5 V, max. 2000 mA
Operation
Warning: Electric shocks can lead to severe injuries and death. Avoid touching the metal parts
of the battery clamps and the battery poles.
The quick-start system may only be used as starting assistance for vehicles with 12 V batteries.
Main switch
1. You can switch on the charge level indicator (4) and the USB output (6) by briefly pressing
the main switch (5) .
2. If you hold down the main switch (5) for a few seconds, the LEDs of the working light (8) are
switched on.
3. If you press the main switch (5) again, the working light (8) switches from constant light to
flashing light.
4. By pressing the main switch (5) again, the working light (8) is switched off. The control lights
of the USB output and the charge level indicator remain on.
5. After a few seconds, these control lights switch off automatically provided no device is
connected to the USB output or the quick-start station is not being charged.
Publicidad
