Garden Wood Furniture Newport 972KFBA Instrucciones De Armado página 3

D
D
Fig. 2a
H I
Fig. 2
H I
2. Lay the Top Assembly (A) face-down on a clean, protected surface. Place the Legs (D) against the
braces as shown in Figure 2. Attach each leg with two Washers (I) and two Nuts (H) and tighten
with the provided wrench (L). See Figure 2b.
Fig. 3
Fig. 3a
3. Spread a thin layer of glue in the elongated holes in the Base Assembly. Place it onto the legs,
and quickly wipe up any excess glue with a damp rag. See Figure 3. Using the Hex Wrench (K)
provided, fasten with a Barrel Bolt (F) and Barrel Nut (G). Use a screwdriver to align the slot in the
nut. Start the barrel bolt on the nut and fasten securely, using the Hex Wrench (K). See Figure 3a.
Turn your table upright.
972KBFA – Page 3 – 09/08