Gigaset ONE X Guía Rápida página 9

Only an electrician should install your Gigaset Smart Doorbell.
1. Switch off the fuse!
2. Remove your old doorbell from the wall.
3. Position the hole template and mark the drill holes (6 mm) at a height
of 1.20 to 1.50 metres.
4. Guide the cables through the hole.
This replacement only works when you use a mechanical
doorbell (without melody) rated at 8 to 24 V, and you connect
the Power Kit Adapter (included) to it. For electromechanical and
digital doorbells, you can no longer use them after installation
(only the Gigaset Smart Doorbell).
Installation
Drilled hole
Drilled hole
DE
–
EN