KNOVA KN 8316 Manual De Instrucciones página 6

Addition (using M+ memory)
• Press the READ key for new measurement;
+/=
• Press the
mode, and the "+" will display on the LCD;
• Keep pressing the
measurement for the addition (displayed on the
bottom of the display), and at the same time,
the "M+" icon will disappear and the stored
memories will be automatically eliminated;
+/=
• Press key again, the sum is shown on
the bottom of the display.
Area
• Press MODE key to select measurement mode.
When "
the current measurement mode is area.
• The length character "L" on the display will blink
showing the length measurement you will be
firstly taking. Press READ key to take
length‑measurement that is displayed on upper
portion of the screen. (Step 1);
• The width character "W" on the display will blink
showing the next measurement to take. Press
READ key to take width measurement that is
displayed on upper portion of the screen (Step 2);
• Then the area is automatically displayed on
the lower portion of the screen;
key to enter the addition
+/=
key to recall previous
" is displayed on the LCD,