Care And Maintenance - Allen + Roth LWS0547G Manual Del Usuario

ASSEMBLY INSTRUCTIONS
7. Attach the ceiling canopy (D) to the preassembled
nipple on the crossbar assembly (A), securing with
canopy lock ring.
8. Note: Lemon oil was applied to panels on the
fixture assembly (E) prior to packaging to prevent
oxidation of the solder. Remove any excess oil
with a clean, soft cloth prior to assembly.
Install the bulb (not included). Use 100-watt max.
standard-base incandescent bulb or 23-watt max.
standard-base spring self-ballasted CFL.

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
• Use a clean, soft cloth to wipe the panels on the fixture assembly. Cleaning products containing
ammonia should not be used as it can affect the finish on the solder. Solder is a metal that can
oxidize (tarnish), which results in a white film on the solder. This can be removed and prevented
with a light coating of lemon oil.
• Use a clean, soft cloth to clean the fixture base. You may also dampen the cloth with a mild solution
of soapy water. Rinse thoroughly with a white cloth dipped in clean water.
7
8
Lowes.com/allenandroth
6
Outlet Box
Canopy Chain
Loop
D
Canopy Lock
Ring
E
Bulb