Mettler Toledo SLS510 Manual De Instrucciones Y Funcionamiento página 71

Marking
1725
1
EN60079-0+A11:2013 was compared to EN60079-0:2006 and EN61241-0:2006 that were used for the original certification and no changes in the
"state of art" apply to this equipment.
2
EN60079-11:2012 was compared to EN60079-15:2005 which was used for the original certification and no changes in the "state of art" apply to this
equipment.
3
EN60529+A2:2013 was compared to EN60529+A1:2000 which was used for the original certification and no changes in the "state of art" apply to this
equipment.
4
EN60079-11:2012 was compared to EN60079-11:2007 and EN61241-11:2006 that were used for the original certification and no changes in the "state
of art" apply to this equipment.
5
Certificate issued by FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK SL4 1RS, NB Number 1725
Mettler-Toledo GmbH
Issued on: 2016-04-20
Todd Manifold
General Manager
64068638 SLS510 veiecelle
EU Directive
ATEX Directive
2014/34/EU
(OJEU, 2014, L96, p309)
ATEX Directive
2014/34/EU
(OJEU, 2014, L96, p309)
Ralph Werren
Head of SBU OEM
Standards / Norm
FM09ATEX0049X Supplement 2
1
EN 60079-0:+ A11: 2013
2
EN 60079-11 : 2012
3
EN 60529:+A2: 2013
II 3 G Ex nL IIC T4 Ta= -20°C to +40°C ; IP67
5
FM09ATEX0048X Supplement 2
1
EN 60079-0:+ A11 2013
4
EN 60079-11 : 2012
EN 60079-26 : 2007
3
EN 60529:+ A2: 2013
II 1 G Ex ia IIC T4 Ta= -20°C to +40°C ; IP67
II 1 D Ex iaD T73°C ; IP67
71
Tillegg