Care And Maintenance; Troubleshooting - BLACK SYSTEM 3010 DGT Manual Del Usuario

SELECTION OF HEATING ELEMENT
• Press SELECT (13) to activate one lamp at a time.
• Press MAX POWER (8) to bring all 5 lamps simultaneously up to maximum power.
MANUAL SETTING OF THE
• Press MANUAL (15) for complete freedom to set the
• Press START (5) to begin operation
• Set operating time (7), ventilation (11) and temperature of the 5 lamps (9).

CARE AND MAINTENANCE

Unplug the appliance from the power supply before carrying out any cleaning operation.
The BLACK SYSTEM 3010 DGT lamp does not require any particular maintenance apart from
keeping the exterior free from dust so as to prevent the air vents from becoming blocked. Do
not use cloths soaked in detergent to clean the appliance, in order to prevent such liquids
from entering the appliance. Use of a buckskin cloth soaked in water is recommended.
Do not use cloths soaked in denatured alcohol.

TROUBLESHOOTING

If the appliance does not start after pressing the on/off switch, verify that the plug is properly
inserted into the mains socket. If it still does not start, contact specialist or authorized repair
personnel and have the fuse above the on/off switch checked. The fuse must be rated at 6.3A,
250V. Type of fuse: Super Rapid.
For all other malfunctions contact specialist or authorized repair personnel.
BLACK SYSTEM 3010 DGT
16
BLACK SYSTEM 3010 DGT manually