Setting Started; Charging The Internal Battery; Usb Charging Port; Wireless Charging - Thompson WS06IPB Instrucciones De Funcionamiento

Setting started

Plug the power adapter into the back of the product, and the other end into a standard electrical outlet.

Charging the internal battery

The internal battery will automatically start charging once the AC adaptor is attached. The left side LED
(next to the Bluetooth button) will change to red to indicate that power is connected).
The battery will take 2.5 hours to fully charge and will provide 4-5 hours playback time.
This will be significantly reduced if you also charge your phone from the internal battery.

USB charging port

To charge your telephone, plug your USB cable into the back of the device and plug into in the
telephone.

Wireless charging

Compatible with wireless charging enabled smart phones. Other smart phones need to use wireless
charging adapters to work.
*Note: When the phone is being charged your phone's charging indicator will show as normal. The right
side LED will turn green when wireless charging is in progress.
*Note: For maximum charging efficiency, the phone must be aligned with the center of the charging
area.
*Note: Phones that are capable of wireless charging may need to be placed slightly off center. The
built-in wireless receiver may not be centered inside the phone. This varies by brand/model.
- EN 4 -