Publicidad
INSTALLATION GUIDE // HOOD P_300_330/900 AND 1200 VERS.2009
PLACE THE HOOD ON THE HEIGHT OF THE 65 CM
1
ABOVE THE COOKTOP. DRAW AND DRILL THE HOLES.
HANG THE HOOD (INSTALLATION FROM BOTTOM TO TOP)
AND TIGHTEN THE 4 CLAMPING SCREWS (A).
B
S T
E P
C
A
PUT THE HOOD, INSTALL IT BY THE SIDES,
3
INTRODUCE THE SCREW TO THE GROOVES B (STEP C)
AND LIFT THE HOOD (STEP D)
4
(E)
SHEET METAL SCREW
CONNECT THE FUME EXTRACTOR, THEN USE THE DUCT TAPE
2
TO SEAL THE JOINTS.CONNECT THE HOOD TO THE MAINS SUPPLY.
CONNECT THE HOOD
TO THE MAINS SUPPLY.
FIX THE HOOD FROM ITS
INTERIOR PART WITH SUPPLIED
SCREWS (E). FIRST TO FIX WITH
SCREWS M5.
BACK SIDE
1 - SCREW M5 (2)
FRONT SIDE
CONNECT THE FUME EXTRACTOR,
USE THE DUCT TAPE TO SEAL THE JOINTS.
Publicidad
