Blade Installation - minkaAire Sabot Manual De Instrucciones Certificado De Garantia

4

BLADE INSTALLATION

Step 1. Remove the up housing from the fan motor assembly by
removing five screws.(Fig.5)
Step 2.Insert the blades through the slots on the fan motor
assembly. Attach the fan blades to the fan motor assembly using
the blade screws and fiber washer and tighten them securely.
(Fig. 6)
Step 3. Install the up housing to the fan motor assembly with the
screws previously removed.
Screws
Up housing
Fan motor
assembly
Fig. 5
Fig. 6
Fan motor
assembly
Screw
Fiber Washer
Blade