Checking The Battery Level - Zagg Power Amp 18 Manual De Instrucciones

USING THE FLASHLIGHT
Your Power Amp 18 has three flashlight modes: a bright LED flashlight that's ideal for
lighting any situation, a lantern that provides a soft glow, and an emergency beacon
that really attracts attention.
To use the flashlight feature:
1. Press the flashlight button once to turn the flashlight on.
2. Press the flashlight button once to turn the flashlight off.
To use the lantern feature:
1. Press the flashlight button twice to turn the lantern on.
2. Press the flashlight button once to turn the lantern off.
To use the beacon:
1. Press the flashlight button three times.
2. Press the flashlight button once to turn the beacon off.

CHECKING THE BATTERY LEVEL

Your Power Amp 18 carries 18000mAh of power to help make sure your battery
never dies again. To check how much power it still carries:
1. Press the battery button. The LEDs under the USB outlets will light one
of four ways:
a. Four lights indicate 75% power or more remaining.
b. Three lights indicate between 50-74% power remaining.
c. Two lights indicate between 25-49% power remaining.
d. One light indicates less than 24% power remaining.
2. Recharge your Power Amp 18 whenever you wish.
POWER SAVING TIP
Don't leave your charging cable plugged in to your Power Amp for extended periods
of time. Remove your cable when you're done charging to preserve more portable
battery power.