General Safety Warnings - EDM 32507 Instrucciones Importantes De Seguridad

07486
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
EN

GENERAL SAFETY WARNINGS

READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE CONSULTATION - WARNING: TO REDUCE THE
POSSIBLE RISKS OF FIRE, ELECTRICAL DISCHARGES OR PERSONAL INJURY, TAKE THE FOLLOWING INTO ACCOUNT
ADVERTENCIA DE SEGURIDAD
The product is an energy-saving automatic sensor lamp, adopting integrated circuit and precise detecting components.
It gathers automatism, convenience, safety, saving-energy and practical functions. Its performance is stable. It can
identify day and night. The lamp can turn on when one enters detection field and can turn off automatically when one
leaves detection field.
SPECIFICATION
Power Source: 220-240V/AC
Power Frequency: 50/60Hz
Ambient Light: <3-2000LUX (adjustable)
Time Delay: Min.10sec±3sec
Max.3min±30sec
Rated Load: Max. 2x25W (E27)
FUNCTION
- Can identify day and night: The consumer can adjust working state in different ambient light. It can work in the daytime
and at night when it is adjusted on the "sun" position (max). It can work in the ambient light less than 3LUX when it is
adjusted on the "moon" position (min). As for the adjustment pattern, please refer to the testing pattern.
- Time-Delay is added continually: When it receives the second induction signals within the first induction, it will restart to
time from the moment.
- Adjustable Time Delay: the length of time delay could be set according to the customers' requirement, the minimum
time of this item is 10sec ± 3sec, the maximum is 3min±30sec.
INSTALLATION
- Switch off the power.
- Unscrew the plastic screw nut and remove the glass lampshade.
- Pass the wire through the hole in the bottom and connect the power wire into connection-wire column according to
the connection-wire diagram. Install the sensor lamp in the position where you need with inflated screws.
- Enclose the incandescent bulbs or energy-saving lamps. Install back the lampshade, then electrify and test it.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
INSTRUCTION MANUAL
MODEL 32507
Detection Range: 360°
Detection Distance: 6m max(<24ºC)
Working Temperature: -20~+40ºC
Working Humidity: <93%RH
Installation Height: 2.2-4m
Detection Moving Speed: 0.6-1.5m/s
-6-