Assign An Ip Address - Axis Q19 Serie Guia De Instalacion

Page 14

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server the network camera will use 192.168.0.90 as
the default IP address.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install,
use the method that best suits your purpose.
Both of these free applications are available on the Axis Network Video Product CD supplied with
this product, or they can be downloaded from www.axis.com/techsup
Method
AXIS IP Utility
See page 14
AXIS Camera Management
See page 15
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address, e.g. in other operating systems, see
page 20.
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the network camera.
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
AXIS Q19 Series Installation Guide
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7