Usb Connection - Rohm F-senso chuck Guia De Inicio Rapido

Included in delivery:
1 Measuring head with test protocol
Measuring bolts in sizes 5 mm, 15 mm,
25 mm, 30 mm
Measuring bolt extension with length of 25 mm
1 Tablet Pc with pre-installed measuring and
evaluation program
1 uSB data/charging cable
1 uSB charging cable / 1 uSB mains adapter
1 Insertion aid
Storage case with foam insert
handle

uSB connection

on/off button Status leD
Insertion aid
Measuring bolt Measuring
point
Warning
Improper handling of the product can lead to serious personal
injuries and considerable material damage. Non-instructed per-
sonnel are not aware of the dangers and should leave the work
area when the product is being used.
Danger
If the F-senso chuck is clamped improperly and eccentrically in a
rotating chuck, centrifugal forces will arise which might lead to the
measuring head being hurled out at high speeds.
Danger
The speed may only be selected so high that the clamping force,
as a result of the centrifugal forces of the clamping jaws, does not
fall below 1/3 of the clamping force at a standstill. There is a
danger of the measuring head being hurled out. here, observe
the warning on the Tablet!
Danger
The measurement of rotating two-jaw clamping devices is prohi-
bited. If the F-senso chuck is clamped improperly and eccentri-
cally in a rotating chuck, centrifugal forces will arise which might
lead to the measuring head being hurled out at high speeds.
Warning
The charging/data cable must not be plugged into the measuring
head for any use. otherwise, this can result in serious material
damage and personal injuries.
Danger
Remove the insertion aid before starting a measurement under
rotation. The insertion aid might come loose from the measuring
head at high speeds and flail around.