Setting Alarms And Timers; Setting An Alarm; Setting The Sleep Timer; Setting The Kitchen Timer - PURE Evoke Flow Manual De Instrucciones

Setting alarms and timers

Evoke Flow has two alarms and two types of timers (kitchen and sleep). To set an alarm or a timer up, tap
Options and select Alarm or timer.

Setting an alarm

1. From the Alarm or timer menu, Turn and press the Select dial to select either Alarm 1 settings or
Alarm 2 settings and tap Edit.
2. Turn and press the Select dial to turn the alarm On or Off.
3. Turn the Select dial to adjust the hours and tap to confirm. Repeat to set the minutes.
4. Turn the Select dial to set the days the alarm sounds. Choose between Once only, Daily,
Weekdays, Weekends, Every Saturday and Every Sunday then Press the Select dial to confirm.
5. Turn the Select dial to set the alarm type. Choose between Pure Connect station, FM radio or
Tone then Press the Select dial to confirm.
6. If you've set the alarm type as Pure Connect station or FM radio, turn the Select dial to choose
between Last tuned (last station tuned to) or select a favorite Pure Connect station or FM preset if
you have any saved.
7. Turn the Select dial to change the alarm volume and tap to confirm.
8. A set alarm is indicated by
Note: Any alarms that are set will not go off if Evoke Flow is being powered by a ChargePAK.

Setting the sleep timer

The sleep timer switches your radio into standby/sleep after a specified amount of time. From the Alarm
or timer menu, select Sleep timer. Use the Select dial to adjust the length of the sleep timer in 15 minute
steps from 15 mins to 1 hour 30 mins. Tap Save to store.
A set sleep timer is indicated by

Setting the kitchen timer

The kitchen timer sounds a beeping tone after a set period of time.
From the Alarm or timer menu select Kitchen timer and use the Select dial to adjust the length of time.
Tap Mins to toggle between minutes and hours. Tap Save to confirm.
A set kitchen timer is indicated by

Cancelling a sounding alarm or timer

To cancel a sounding alarm or timer, push either the Select or Volume dial. A sounding alarm will
automatically cancel after 1 hour.
Note: Pushing the Volume dial will not cancel a tone alarm.
Warning: When powered by ChargePAK E1, pressing Standby switches the radio off and any set alarm or
timer will not sound.

Snoozing a sounding alarm

Tap the Snooze button to snooze a sounding alarm for the specified time (default 9 minutes).

Changing the alarm snooze time

From the Alarm or timer menu, select Snooze time. Use the Select dial to adjust the duration of the
snooze from 5 to 15, then either 20/25/30/40 minutes, or 1 hour.

Cancelling a snoozing alarm

To cancel a snoozing alarm push either the Select or Volume dial.
12
in the icon bar.
in the icon bar.
in the icon bar.