Controls And Sensors - PURE Evoke Flow Manual De Instrucciones

Controls and sensors

No. Control
1 Context‑sensitive
touch buttons
2
Back ( )
3 Volume/mute dial
4 Select dial
5 Standby touch
key
6 SnoozeHandle
7 Light sensor
6
7
3
Description
Tap the button that corresponds to the function shown on screen that you
want to use.
Tap to display the Source menu then choose between Pure Connect, Media
player, FM radio and Auxiliary input. Tap when browsing stations to go back to
the previous list. Tap in the Options menu to go back to the previous screen.
Turn to adjust volume. Push to mute and un‑mute.
Turn to navigate menus, stations or options and push to select an item. Push to
pause a media track or podcast.
Tap followed by OK to switch Evoke Flow on; do this again to switch Evoke
Flow into standby (or off if powered by a ChargePAK E1).
Tap to snooze the alarm for 9 minutes. Grip and hold to brighten the display to
maximum brightness for 3 seconds. (Does not work when Evoke Flow is powered
by a ChargePAK E1.)
Adjusts the display brightness according to the light levels in your room (only
works when brightness level is set to 'Automatic').
2
4
1
5
EN
5