Power On/Off; Video Recording - Wiseup U9 Guia Del Usuario

2. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure the Micro SD card is securely fitted into the SD card slot
on your camera. Camera will not work without a Micro SD card. You are
suggestedto use SDHC Class 4 Micro SD card.
>> Camera is fully charged when the blue indicator light isout.

1). POWER ON/OFF

(1) Power on the camera by pressing the Power On/Off Button for 2 seconds; the
camera will vibrateonce while both blue and red indicator lights will be on for 4
seconds. Then the blue indicator light will be out and the red indicator light will
stay illuminated, indicating the camera has entered into standby mode
automatically.
(2) Power off the camera by pressing the Power On/Off Button for 2 seconds
again.The red indicator light will flash 3 times with the camera vibrating and then
turn off.
(3)The camera will shut down automatically if the camera is in standby mode
without any operation within 2minutes.

2). VIDEO RECORDING

(1) Power on the camera by pressing the Power On/Off Button for 2 seconds; the
camera will vibrateonce while both blue and red indicator lights will be on for 4
seconds. Then the blue indicator light will be out and the red indicator light will
stay illuminated, indicating the camera has entered into standby mode
automatically.
(2) Press the Photo/Video Button for 2 seconds; the camera will vibrate
twicewhilethe red indicator light will flash 3 times and then turn off, indicating the
camera is recording video.
(3) Press the Photo/Video Button once to stop the video recording. The camera
will vibrate once and the red indicator light will be solid on, indicating the camera
is back to standby mode.
(4) Press the Photo/Video Button for 2 seconds to resume video recording.